Standard Interpretations
OSHA requirements are set by statute, standards, and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. Each letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information.
- 1910.217 - A request that the Automatic Nailing Machine be listed in 1910.217. - 06/14/1977
- 1910.217 - Capacitive sensor palm buttons. - 06/08/1992
- 1910.217 - Displeasure with the procedures utilized by OSHA. - 11/10/1976
- 1910.217 - Guarding of Punch Presses. - 01/10/1977
- 1910.217 - Installation of a single stroke mechanism on full revolution mechanical power presses. - 04/29/1982
- 1910.217 - Interpretation of Mechanical Power Presses. - 07/17/1975
- 1910.217 - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses. - 04/22/2005
- 1910.217 - Machine Guarding Standard. - 03/29/1996
- 1910.217 - Maximum permissible guard openings for blade guards on cooling fans - 08/21/2003
- 1910.217 - Mechanical power press brake system monitoring requirements. - 04/20/1994
- 1910.217 - Mechanical power press requirements and platen presses. - 12/24/1991
- 1910.217 - Mechanical Power Presses. - 02/22/1977
- 1910.217 - Multiple interpretations regarding mechanical power presses - 05/08/1998
- 1910.217 - Platen Presses. - 06/13/1978
- 1910.217 - Power press brake used as a mechanical power press (punch press). - 09/23/1980
- 1910.217 - Power Presses of the Powder Metal Industry. - 07/23/1986
- 1910.217 - Presence sensing devices used to actuate mechanical power presses. - 07/26/1977
- 1910.217 - Punch presses and the revised standard for mechanical power presses. - 07/29/1975
- 1910.217 - Safeguarding the point of operation on mechnical power presses. - 08/06/1979
- 1910.217 - Single stroke mechanism as used on full revolution mechanical power presses. - 06/24/1980
- 1910.217 - Specialized devices used to control mechanical power presses. - 01/31/1992
- 1910.217 - The application of presence sensing devices to general purpose power press brakes. - 12/18/1980
- 1910.217 - The appropriate location for an air pressure sensor. - 01/13/1981
- 1910.217 - The Mechanical Power Press Standard. - 12/20/1979
- 1910.217 - The use of self-tripping on hydraulic power presses. - 10/04/1983
- 1910.217 - Third party certification for the Astro-Press 1000 control system. - 02/13/1996
- 1910.217 - Two-hand control device used to operate a mechanical power press in continuous mode. - 12/21/1992
- 1910.217(b)(7)(iii) - Need for Removing Selector Key on Part Revolution Mechanical Power Presses - 02/11/2013
- 1910.217(c) - Point of operation guarding for power presses. - 01/22/1998
- 1910.217(c)(1)(i) - Evaluation of hair pen point of operation guards - 03/05/1980
- 1910.217(c)(3)(iii) - Proper installation of presence sensing devices for mechanical power presses. - 12/23/1998
- 1910.217(d)(9)(iv) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses. - 04/22/2005